View HAM10D-033120_4466058.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

H HiTRON
ON-BOARD UNIVERSAL INPUT AC-DC ENCAPSULATED MODULAR POWER SUPPLIES 10 WATTS SINGLE & DUAL OUTPUT HAM10S & HAM10D SERIES
FEATURES:
ON-BOARD AC/DC MODULAR POWER SUPPLIES UNIVERSAL AC INPUT RANGE COMPACT IN SIZE MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB.22 / FCC CLASS B CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: 90-264Vac typical. (or 110-340Vdc). Input Frequency: 47-63 Hz. (50/60Hz.Nom.) or DC. Input Current: 0.3A @115Vac./ 0.13A @ 230Vac. Inrush Current: 32.5A peak @230Vac. Input Fuse: Use external fuse. 1.0A/250Vac for primary fuse is suggested. Dielectric Withstand: Meet IEC950. 3,000Vac-Output/Input. 1,500Vac-Input/GND. 500Vac-Output/GND. EMI: Meet CISPR PUB.22/ FCC Class B. Hold-up time: 20mS @115Vac, 80mS @230Vac. Earth Leakage: Less than 3.5mA @230Vac.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: 10 Watts typical. Output Indicator: LED. Line Regulation: Various with output voltage. HAM10S 0.1% typical. HAM10D 0.2% typical. Load Regulation: Various with output voltage. HAM10S 1.0% typical. HAM10D 2.0% typical. Noise & ripple: 1.0% typical peak to peak. OVP: Built-in on main output. Adjustability: From -10% of main output till OVP. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Operating Temperature: -10 to +70C range. -10C to +50C full load without derating. From +50C, derating linearly to half load @+70C.
(Refer to Derating Chart.)
GENERAL SPECIFICATION
Efficiency: 67-79% typical (Various with output voltage). Switching Frequency: 75K Hz. Circuit Topology: Fixed Frequency Flyback circuit. Transient Response: Typical peak deviation 250mV, Recovery time < 3mS for a 25% load change. Case: Impact resistant thermo-plastic enclosure. Weight: 120g (4.23 Oz). Power Density: 2.51 Watts. / Cubic inch. Safety Standard: EN60950/ UL1950 Class I. MTBF: 100,000 hours. Mil Std 217, 25C.
Storage Temperature: -20C to +85C. Temperature Coefficient: 0.02% /C. Humidity: Up to 95%RH, Non-condensing. Cooling: Convection cooling for +50C @ full load. At least 100LFM moving air is recommended for full load > +50C in a confined area. Commercial Grade only.
NOTE: (1) All measurements are at nominal input, full load, and +25C unless otherwise specified. (2) Load Regulation measured from Full-Load (F-L) to Half-Load (H-L) at nominal input and others loaded at half load.
Due to requests in market and advances in technology, specifications subject to change without notice.
-3-
OUTPUT VOLTAGE/ CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO. HAM10S-033243 HAM10S-050200 HAM10S-090112 HAM10S-120090 HAM10S-150072 HAM10S-240045 HAM10S-480025 VO1 @ TYP. 2.43A 2.00A 1.12A 0.90A 0.72A 0.45A 0.25A VOLT. 3.3V 5.0V 9.0V 12.0V 15.0V 24.0V 48.0V PEAK 2.91A 2.44A 1.34A 1.08A 0.86A 0.54A 0.30A
DUAL OUTPUT
MODEL NO. HAM10D-033120 HAM10D-050100 HAM10D-120045 HAM10D-150035 +VO1 @ TYP. VOLT. 1.20A +3.3V 1.00A +5.0V 0.45A +12.0V 0.35A +15.0V MAX. 1.38A 1.15A 0.51A 0.40A -VO2 TYP. VOLT. MAX. 1.20A -3.3V 1.38A 1.00A -5.0V 1.15A 0.45A -12.0V 0.51A 0.35A -15.0V 0.40A
Symbols: "" OVP built-in. "@" Adjustable. ""Double Feedback. Note: (1) Max. (maximum load) is the continuous operating load of each rail, but the max. load of each rail can not be drawn from all outputs at the same time. (2) Peak output, less than 60 Sec. with duty cycle <10%.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 120.0g (4.23 Oz.)
PIN ASSIGNMENT
PIN NO. PIN #1. PIN #2. PIN #3. PIN #4. PIN #5. PIN #6. SINGLE AC-GROUND AC-NEUTRAL AC-LINE + VO1 NO PIN DC-COM DUAL AC-GROUND AC-NEUTRAL AC-LINE + VO1 DC-COM -VO2
DERATING CHART
CASE SIZE: AM02
-4-

▲Up To Search▲

Price & Availability of HAM10D-033120

	To Download HAM10D-033120 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .